13.56MHz HF Chip RFID playground reminder wristband
RFID Playground Countdown Reminder Wristband not only offers a sleek design but also incorporates advanced features to ensure your safety and convenience.
With its magnetic charging capability, this wristband guarantees a long standby time, eliminating the hassle of frequent charging. Merchants can effortlessly adjust the countdown timer by adding or subtracting time in half-hour increments.
Equipped with a high-frequency RFID chip, this wristband provides seamless access control, making it perfect for playgrounds, climbing walls, and other recreational venues. Effortlessly enjoy your favorite activities without the hassle of keycards or physical tickets.
Product Description
Model
MH- CR02
Countdown time setting
In increments of minutes or half an hour, up to 24 hours
Timeout timing
Countdown ends 30 seconds later, timeout starts, up to 60 minutes
Vibration reminder
Vibration motor reminder
LED screen display
Press the screen button to light up and check the remaining time
RFID chip capacity
1K Byte
RFID working frequency
13.56Mhz
Battery charging method
Magnetic charging
Battery capacity
55mAh
Charging time
60 minutes
Battery charge voltage
DC5.0V
Battery type
Polymer Lithium Ion Battery
Standby time
>100 hours
Working hours
24 hours
Waterproof level
IP68
Wristband strap material
TPU material(Elastic and other straps are available)
Product Show
Functional Operation
●Countdown time setting
The countdown time can be set by the special time setter.In increments of minutes or half an hour, up to 24 hours.
●Normal operation
When the wristband connects and induces time setter, the countdown time setting is completed and the countdown begins. Before the countdown time ends, if the wristbands accidentally induce the time setter again, the countdown time will not be affected (except for the reset instruction).
●Countdown time suspend
If you want to stop the countdown time midway, you can use time setter to reset it, or connect the charging cable to charge and stop the countdown time.
●LED screen display
During countdown time working, the green indicator light flashes slowly. Press the screen button to light up the display to check the remaining time. 30 seconds after the countdown ends, the timeout timer starts, red light flashes,and press the screen to light up the display to check the timeout time. After 1 hour of timeout, the bracelet stops working and the display goes off.
●Vibration reminder
5 minutes before the countdown time ends, the wristband vibrates 3 times as a reminder, and when countdown time ends, the motor vibrates for 6 seconds as a reminder. When the timeout is 55 minutes, the wrsitband vibrates 3 times as a reminder, and when the timeout is 60 minutes, the wristband continues to vibrate 6 seconds as a reminder.
●Low battery reminder
When the battery power is less than 20%, the red and green indicator lights will flash alternately.
●Charging instructions
The red indicator light is on when charging, and the green light is on when fully charged.
●System reset
If an abnormal situation occurs, you can reset the system by connecting the charging cable to charge.
RFID Countdown Time Reminder Wristband Time Setter
C-series Contactless Smart Card Reader
